Brass coach roof screw (straight knurling) £1.25 each
Stanchions for No.1 & No.2 lumber and fibre
wagons bolt through bolster complete
with nut state diam of collar,
i.e: large 145” small 125” 75p each
Door ferrules for early coaches and wagons 50p each
Door handle for 1921 – 1923 covered fridge van 75p each
Crank pins ‘push in’ type. State long or short & loco type 30p each
Crank pins threaded for no.2 & no.3 type loco’s state long or short 75p each
NOTE:
Item 4 Push in Crank Pin.
Item 5 Threaded Crank Pin.
These pins are dimensioned to Meccano drawings and maybe a tight
fit in new repro wheels, if so, on item 4 push a 2mm through
with your fingers (item 1/8” drill) and secure it with loctite.
Hexagon nut to suit crank pins Ref: No.5 above 30p each
Round wheel nuts – slotted head for No.2 & No.3 mechanisms 50p Each
Tapped 4 B.A or 5 B.A (electric or clockwork)
6 B.A in brass for Bassett Lowke 50p Each
Bogie fixing bolt with washer (state which loco) £1.50p Each
Brass knobs for loco control rods (6, 7,9,10 B.A) £1.00 Each
(State Loco if unsure)
Shouldered steel bolt with nut for bogie pivot on early 70p Each
No.2 wagons and coaches
Safety valve (turned steel) for No.3 loco’s with threaded shank 75p Each
and nut, unpainted
Telegraph pole with collar and nut to bolt through base drilled £1.50 Each
for 2 or 3 crossbars (state which)
T/pole crossbar and rivet (drilled for insulators) £1.30 Each
T/pole insulators and fixing pin for item No.17 35p Each
Threaded ‘rivet’ and nuts for loco couplings, particularly useful 50p Each
where the head is inaccessible i.e.; No.1 & No.2 SP tanks
Pulley for early crane truck jib 75p Each
Complete assembly, nose cone/fan/shaft/pulley for snow plough £5.00 Each
Driving axle and pulley for snowplough turned for corthorn £1.30 Each
press on wheels
Knurled axle for snowplough £1.00 Each
Turned rivet for loco front couplings (Brass or Steel) 30p Each
Replacement nut and bolt for fixing mechanism to loco body £1.00 Each
(state body)
Buffer head/spindle/spring retainer for hydraulic buffer stops £2.25 Each
Main cylinder and brass end to push into main cross beam £2.75 Each
Nord tender bogie fixing nut and bolt 75p Each
Steel intermediate gears for electric mechs with fixing rivets £5.00 Each
Brass reversing gears for clockwork mechs with fixing rivets £5.00 Each
Final drive pinion/axle for clockwork mechs £6.00 Each
NOTE; Please phone or send damaged gears to be replaced
Knurled brass nut for electrical accessories 0’ Gauge 6 B.A.
flat top or waisted for terminal rail £1.00 Each
Knurled brass nut for electrical Meccano type 5/32 B.S.W £1.00 Each
Knurled brass electric earth connection 9 B.A. £1.oo Each
Threaded rod and two knurled brass nuts for tankers etc £1.50 Each
Rod Threaded one end only with nut £1.00 Each
Small brass buffer and nut £1.40 Each
Large brass buffer and nut £1.60 Each
PE valve for fire box top £2.00 Each
Early loco buffer beam lamp with threaded tail and nut to fix £1.50 Each
Bogie/Pony truck axles (knurled ends) £1.25 Each
Axles for No.1 & No.2 mechs to suit 149” holes knurled £2.00 Each
for push fit wheels
No.2 clockwork mech threaded both ends (5 B.A) with quartering pins £3.00 Each
Axle with split pins for nut and bolt wagons £1.50 Each
NOTE: All other mech axles made
No.2 crane truck pivot bolt 65p Each
Square nut 6 B.A (brass or steel) 30p Each
Chimney for brake van with threaded tail and nut 50p Each
Spacer rods for mechanism side plates (state which mech) £1.00 Each
P.E Whistle £3.50 Each
Support ‘hoops’ for tarpaulin wagons 75p Each
Male pin plug with insulating washers and nut for Electrical Accessories £2.00 Each
Hornby Railway connecting pins £1.50 Per 10
Brass Roller Pick-Up for Metro Coaches £1.25
Hand rail knobs with nut to fix
(All loco's except Princess Elizabeth) £1.35
Stainless Steel Hand Rails
0-4-0 and No. 2 Special tank £1.00 (per pair)
Cab Grab Rails No. 2 Special Tank £1.00 Each
Brass Whistle No. 2 Specail Tank/Compound/Yorkshire L1 £1.50 Each
Brass Safety Valve No. 2 Specail Tank (tail threaded 8BA) £1.00 Each
As Above, but glue to base 65p Each
Base with two values £3.00 Each
Bogie Frame (finished black) to suit
No. 2 Special Tank/No. 3 Loco's (Royal Scot etc) £9.50 Each
'Special loco bogie frame £10.50 Each
Pony Truck with weight (finished black) to suit above loco's £9.50 Each
Drop Link only for auto coupling 50p
Wagon Buffer (cast in w. metal) 45p
Loco Buffer (cast in w.metal) 45p
Brass Bush Cap. Early 6V Mech £2.00
Hexagon Reverse Knob for 'P.E' £1.00
Hook for Brakedown Crane (red or black) £1.25
Celluloid for Signal Spectacles
Red, Green or Amber piece 3inc by 4inc 40p
Princess Elizabeth bogie truck £22.50
Princess Elizabeth pony truck £22.50
Princess Elizabeth front buffer £1.00 Each
Princess Elizabeth tender buffer 85p Each
Wheels - White metal 'aged'
Six Spoke Bogie/Pony for Number Two and Three Locos £2.50 Each
Mansell Coach £2.50 Each
Six Spoke High Capacity Bogie Wagon £2.50 Each
Eight Spoke Tender £3.00 Each
Tender vacuum pipe (cast in white metal) £1.25 Each
Loco vacuum pipe (cast in white metal) £1.25 Each
Chimney no.3 loco (cast in white metal) £1.25 Each
Dome No.3 loco (cast in white metal) £1.25 Each
Tree base, finished brown £1.00 Each
Vent dome, No.3 LMS tender (bolt-on) £1.50 Each
Post-War Dinky toy axles £1.00 Per 10
Supertoy axles £1.00 Per 10
Lever Frame Spares.
Control coupling £2.00
Slotted coupling £2.50
Shoulder bolt/spacer/nut £1.50
HOME, BASSETT LOWKE, BOWMAN, MISCELLANEOUS, HOW TO ORDER,
CONTACT US LINKS